37 12 012 Carry Out Ride-Height-Calibration
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Ride-height-calibration must be carried out after the following work:
- Replacement of control unit
- Replacement of wiring harness
- Replacement of ride-height sensor
Connect BMW diagnosis system.
Switch on ignition.
Carry out ride-height-calibration (menu item: "Service function").
Version with Run Flat Indicator: initialize Run Flat Indicator See 36 11 000 INITIALIZING RUN FLAT INDICATOR (RPA)
Version with Tire Pressure Control: initialize Tire Pressure Control