LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2012 >> Cooper Base, 2D Hatchback, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1345 (COLLISION - BODY PANEL REPAIR (E65) 750i, (E66) 750Li) >> 62 Rear Lid >> 41 62 000 Trunk Lid Removal And Installation

41 62 000 Trunk Lid Removal And Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Remove and install panel for rear lid at top  . See 51 49 006 REMOVING AND INSTALLING/REPLACING TRIM FOR REAR LID AT TOP .

Unhook Bowden cable on rear lid lock.

Disconnect all plug and socket cable connections on rear lid.

Open nuts (1) on rear lid hinge to rear lid.

Adjust rear lid lock  . See 51 24 004 ADJUSTING REAR LID LOCK (LOWER SECTION OF REAR LID LOCK) .

Tighten nuts (1) again.

Fig 1: Identifying Nuts On Rear Lid Hinge
G04767432Courtesy of BMW OF NORTH AMERICA, INC.