34 21 Rear Brake/Disk Brake E65

WARNING: This page is about a different car, the 2008 BMW 760Li, 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, and 2005 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

REAR BRAKE/DISK BRAKE E65 TECHNICAL DATA

Different thicknesses on brake linings	Max. mm	0.01
Radial runout of brake lining (measured at largest Ø of brake lining)	-	-
Disc installed	Max. mm	-
Disc removed	Max. mm	-
Surface roughness of braking surfaces (precision turned)	Ra μ	0.5 ... 3.5
Brake disc diameter	mm	735i, 730d: 324 745i, 740d: 345

REAR BRAKE/DISK BRAKE E65 TECHNICAL DATA

Wear warning from residual lining thickness	mm	3.0
Brake disk minimum thickness (MIN TH) is stamped in brake disc shell	mm	735i, 730d: 18.4 745i, 740d: 22.4
Max. machining limit per friction ring side (M models must not be machined!)	mm	0.8