51 43 201 Removing and installing or replacing trim for roof pillar at front (A-pillar), left or right

WARNING: Vehicles with head airbags:
Read and comply with SAFETY REGULATIONS for working on vehicles with airbag systems.

IMPORTANT: Do not use any sharp-edged tools to remove the trim (risk of damage to head airbag).

Lever out protective cap (1) and release screw underneath.

Tightening torque 51 43 1AZ .

Release panel (3) from clips (2) and remove towards inside.

Installation:

Make sure door seal (4) is correctly seated.

Fig 1: Identifying Panel, Protective Cap, Clips And Door Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (2) must not be damaged.

Guides (3) must not be damaged, replace trim (1).

Replacement:

Modify TWEETER (4).

Fig 2: Identifying Trim, Clips, Guides, And Tweeter

Courtesy of BMW OF NORTH AMERICA, INC.