52 26 311 Removing and installing/replacing lock for left or right rear seat backrest

Necessary preliminary tasks: 

• Remove BACKREST COVER 

Release screws (1).

Tightening torque 52 26 01AZ .

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip Bowden cable (1) and feed out from lock.

Fig 2: Unclipping Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Make sure release unit is correctly seated in counter-support.

Fig 3: Checking Installation Of Release Unit

Courtesy of BMW OF NORTH AMERICA, INC.