63 14 015 Removing and installing/replacing side marker lights on rear left or right
WARNING:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
Necessary preliminary tasks:
- Partially remove the REAR WHEEL ARCH COVER
Turn bulb holder (1) in direction of arrow and pull out of side marker light (2).
Unscrew nut (3).
Remove side marker light (2) in direction of arrow from cover on wheel arch (4).
Installation note:
Journal (5) of the side marker light (2) must first be inserted in cover on wheel arch (4).
Ensure SEALING RING IS CORRECTED FITTED on bulb holder (1).
Make sure bulb holder (1) is correctly latched on side marker light (2).