51 13 085 Removing and installing/replacing trim strip on engine compartment lid (cowl panel)

IMPORTANT: Risk of damage!
Do not bend trim strip (1) and chrome strip (2) during removal.

Carefully detach trim strip (1) in direction of arrow from engine compartment lid.

NOTE: To remove, if necessary tape off engine compartment lid with adhesive tape and remove trim strip (1) with a suitable tool.

Fig 1: Detaching Trim Strip From Engine Compartment Lid

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure chrome strip (2) is correctly seated on trim strip (1), reinstall chrome strip (2) if necessary.

Pay attention to center marking on trim strip (1) and engine compartment lid.