51 71 426 Removing and installing/replacing panel for cover on left or right side member

Necessary preliminary tasks:

Release clamps (1).

Installation note:

Replace faulty clamps (1).

Fig 1: Identifying Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) and threaded blind rivets (2).

Installation note:

Replace faulty screw rivets (2).

Fig 2: Identifying Screw And Threaded Blind Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Release panel (1) at clips (2) and remove.

Fig 3: Removing Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace faulty clamps (1 and 2).

Fig 4: Identifying Clamps

Courtesy of BMW OF NORTH AMERICA, INC.