51 21 170 Removing and installing or replacing outside handle from left or right front door

Necessary preliminary tasks:

Disengage Bowden cable (1) from locking lever (2) and guide (3).

Installation:

Make sure Bowden cable (1) is correctly routed.

Fig 1: Disengaging Bowden Cable From Locking Lever And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Screw (1) is accessible from inside of door through opening (2). If necessary, lever out cover cap.

Release screw (1).

Release screw (3) and remove spacer (4).

Tightening torque 51 21 1AZ .

Fig 2: Identifying Spacer Opening And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

When fitting a new door handle, insert screws (self-tapping screws) in door handle prior to installation.

Feed out door handle (1).

Installation:

Make sure seals (2 and 3) are correctly seated

Fig 3: Removing Door Handle

Courtesy of BMW OF NORTH AMERICA, INC.