51 16 160 Removing and installing/replacing center console trim
WARNING: This page is about a different variant/trim than selected.
Special tools required:
Necessary preliminary tasks:
- Remove LOWER TRIM FROM INSTRUMENT PANEL
- Remove SIDE CENTER CONSOLE PANEL
- Remove COVER FOR INSTRUMENTS
Unclip lower center console heater cover (1) from retaining clips (2) using special tool 00 9 323 and remove.
Fig 1: Unclipping Lower Center Console Heater Cover From Retaining Clips Using Special Tool (00 9 323)
Release screws (1) on both sides.
Release screw (2).
Only on cars with telephone version:
Release screw (1).
Remove front center console trim (2).
Only on cars with telephone version:
Disconnect plug connection (1).
Unclip center console trim (1) from holders (2) and pull back slightly.
Disconnect plug connection (1).
Replacement:
- Remove HEATER/AIR CONDITIONING CONTROL PANEL
- Remove AV CONNECTION SOCKET