51 11 Front bumper
TIGHTENING TORQUES SPECIFICATIONS - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bottom bumper spoiler to front panel | R50/R52/R53 M6 | 6 Nm | ||
| 2AZ Bumper to front panel | R50/R52/R53 | M6 | 6 Nm | |
| 3AZ Support to body | R50/R52/R53/R55/R56/R58/R59 | M8 | Nut | 22 Nm |
| R60/R61 | M10 | Nut | 45 Nm | |
| 4AZ Support to holder, bumper, front | R52/R53/R50 | M8x20 | Screw | 22 Nm |
| R55/R56/R58/R59 | M8 | 18.5 Nm | ||
| R60/R61 | M8x20 | 24 Nm | ||
| 5AZ Adjusting fixture to front panel | R50/R52/R53 | M6x20 | 6 Nm | |
| 6AZ Adjusting fixture to bumper | R50/R52/R53 | M6x20 | 6 Nm | |
| 7AZ Lock bridge to body | R55/R56/R58/R59/R60/R61 | 22 Nm | ||
| 8AZ Support to front panel | R60/R61 | 4 Nm | ||
| 9AZ Strut to front panel | R60/R61 | M6 | 8 Nm |