51 42... Replacing Airbag Badge On Rear Left Or Right Door Trim Panel

WARNING: This page is about a different car, the 2005 BMW 760Li, 2004 BMW 760i, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Risk of injury in event of airbag deployment: Only the pairings listed below may be fitted. The airbag badge must be replaced if the catches/retaining hooks are damaged.

Version Up To 03/2004:

Door trim panel (1) with completely punched-out hole (2):

Airbag badge (3) with retaining hook (4) must be fitted.

Retaining hook (4) must be correctly inserted in bore of carrier for door trim panel (1).

Fig 1: Fitting Airbag Badge With Retaining Hook (Up To 03/2004)

Courtesy of BMW OF NORTH AMERICA, INC.

Build Date From 03/2004:

Door trim panel (1) with 3 incisions (2):

Airbag badge (3) with 3 catches (4) must be fitted.

Catches (4) must be correctly inserted in notches (2) of door trim panel (1).

Fig 2: Securing Airbag Badge With Retaining Hook (From 03/2004)

Courtesy of BMW OF NORTH AMERICA, INC.