LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3875 (COLLISION - BODY PANEL REPAIR (F07) GT Sedan (Except 10-13 535i GT)) >> Rear Trim Panel >> 41 34 038 Stripping-Down Operations - Replacing Tail Panel Outer Section

41 34 038 Stripping-Down Operations - Replacing Tail Panel Outer Section

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
  • Clamp off battery negative lead (job number: 6120 900)
  • Remove bumper trim (FR flat rate number: 5112156)
  • Remove bumper carrier (FR number: 5112050)
  • Remove center bumper guide (FR number: 5112825)
  • Remove left and right bumper guide (FR number: 5112828)
  • Remove luggage compartment floor trim panel (FR number: 5147101)
  • Remove left luggage compartment wheel arch panel (FR number: 5147151)
  • Remove right luggage compartment wheel arch panel (FR number: 5147161)
  • Tail panel trim (FR number: 5146050)
  • Remove rear light on left and right (FR number: 6321180)
  • Partially release wiring harness from tail panel and lay to one side.
  • Partially detach rear lid seal