LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2901 (Body Equipment - Repair - Convertible (R57)) >> Instrument Cluster Trim Panel >> 51 45 252 Removing and installing/replacing knee protection, driver's side, right

51 45 252 Removing and installing/replacing knee protection, driver's side, right

WARNING: This page is about a different car, the 2010 MINI Cooper and 2009 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release screws (1).

Fig 1: Identifying Screws
G04797682Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove knee protection (2).

Fig 2: Identifying Knee Protection And Screws
G04797683Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Replacement: 

Remove INSERT FOR RADIO CONTROL KEY .

Fig 3: Identifying Plug Connection
G04797684Courtesy of BMW OF NORTH AMERICA, INC.