31 35 Stabilizer Bar
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - STABILIZER BAR
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bar for stabilizer to front axle carrier / body | E21 | 50 Nm | ||
| E12, E24 / until 5.82 | 45 Nm | ||||
| E36, E46, E39, E52, E85, E86 | M8 | TIGHTEN IN NORMAL POSITION | 21 Nm | ||
| E60 / except AWD, E65, E66, E67 | Replace nuts | 28 Nm | |||
| E60 / Four Wheel Drive, E61, E63, E64 | Replace nuts | 30.5 Nm | |||
| E83 | M10 10.9 | 56 Nm | |||
| 2AZ | Stabilizer to control arm | E21 | TIGHTEN IN NORMAL POSITION | 130 Nm | |
| 3AZ | Stabilizer link to control arm and stabilizer | E23 | M8 | TIGHTEN IN NORMAL POSITION | 25 Nm |
| E23 | M10 | TIGHTEN IN NORMAL POSITION | 50 Nm | ||
| 4AZ | Stabilizer link to control arm | E34 / Four Wheel Drive | 22 Nm | ||
| 5AZ | Stabilizer link to stabilizer | E34 / Four Wheel Drive | 78 Nm | ||
| E38, E46, E83 | 65 Nm | ||||
| E85, E86 | M10 | 58 Nm | |||
| 6AZ | Stabilizer link on spring strut shock absorber and stabilizer | E28 | (yellow chrome-plated) | 30 Nm | |
| E24 / from 5.82, E28 / from 5.82 | (white chrome-plated) | 33 Nm | |||
| E24 / from 5.82, E28, E31, E32, E34 | (yellow) | (wrench surface on ball head must be parallel to absorber axle) | 59 Nm | ||
| 7AZ | Stabilizer link on spring strut shock absorber and stabilizer (wrench surface on ball head must be parallel to absorber axle) |
E36 | 59 Nm | ||
| E30 / Four Wheel Drive | 47 Nm | ||||
| E52 | 65 Nm | ||||
| E53 | 100 Nm | ||||
| 8AZ | Stabilizer link (with bracket) on stabilizer | E30 / Four Wheel Drive | 47 Nm | ||
| 9AZ | Bracket for stabilizer link on control arm | E30, E36 | 42 Nm | ||
| 10AZ | Bracket for stabilizer link on swivel bearing | E39, E60, E61, E63, E64 | 59 Nm | ||
| 11AZ | Stabilizer link on stabilizer/bracket | E39, E60, E61, E63, E64 | Replace nut | 65 Nm | |
| 12AZ | Stabilizer link to stabilizer | E65, E66, E67 | Replace nut | 58 Nm | |
| 13AZ | Stabilizer link to spring strut | E65, E66, E67 | Replace nut | ||
| Jointing torque | 20 Nm | ||||
| Torque angle | 90 ° | ||||