63 14 020 Removing and installing/replacing front left or right side marker light
WARNING:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
Necessary preliminary tasks:
- Partially remove the FRONT WHEEL ARCH COVER
Turn bulb holder (1) in direction of arrow and pull out of side marker light (2).
Unscrew nuts (3).
Remove side marker light (2) in direction of arrow from cover on wheel arch (4).
Installation note:
Ensure SEALING RING IS CORRECTED FITTED on bulb holder (1).
Make sure bulb holder (1) is correctly latched on side marker light (2).