51-1 45 Trim, instrument trim panel
TIGHTENING TORQUES SPECIFICATIONS - TRIM, INSTRUMENT TRIM PANEL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Instrument panel trim, screws to body | R50/R52/R53 | 48 Nm | ||
| 2AZ Lower instrument panel trim, screws | R50/R52/R53 | 8 Nm | ||
| 3AZ Instrument panel carrier to bulkhead, screws | R55/R56/R58/R59 | M10 | 34 Nm | |
| R60/R61 | Jointing torque | 22 Nm | ||
| Angle of rotation | 90 ° | |||
| 4AZ Bracket, carrier to bulkhead, screw | R55/R56/R58/R59 | 22 Nm | ||
| 5AZ Trim, CD changer | R55/R56/R57/R58/R59 | 1.7 Nm | ||
| 6AZ Retaining bracket to tunnel | R60/R61 | 8 Nm | ||
| 7AZ Support for dashboard to frequency strut (bulkhead) | R60/R61 | 7.5 Nm | ||
| 8AZ Retaining bracket to dashboard carrier | R60/R61 | 7.5 Nm |