51 41 018 Replacing speaker trim on left or right door trim panel (woofer)

Necessary preliminary tasks:

IMPORTANT: Do not drill out welding spots too large as openings are used as a guide.

Drill out welding spots (1) and remove speaker trim (2).

NOTE: Speaker trim is welded to door trim panel only on initial installation. If necessary, release screws instead of welding spots (1).

Fig 1: Identifying Welding Spots And Speaker Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Speaker trim (1) can only be installed in one position.

Secure speaker trim (1) with repair screws (2).

Remove protruding guides (3).

Fig 2: Identifying Speaker Trim, Screws And Protruding Guides

Courtesy of BMW OF NORTH AMERICA, INC.