65 50 011 Removing and installing (replacing) video module for onboard monitor

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

Necessary preliminary tasks:

NOTE: Follow instructions for HANDLING OPTICAL FIBRES .

Release screws (1) and remove cover (2) in direction of arrow.

Fig 1: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unfasten screws (2).

Unlock retaining lug (3) and remove video module (4).

Fig 2: Identifying Video Module, Retaining Lug, Plug Connection, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: