51 11 157 Replace bumper panel, front

Necessary preliminary tasks: 

• Remove FRONT BUMPER PANEL 

If necessary, swap over outside temperature sensor (1) and lead (2).

Fig 1: Identifying Outside-Temperature Sensor And Lead

Courtesy of BMW OF NORTH AMERICA, INC.

Swap over the following parts according to version: 

• Locator lights, see LEFT POSITION LIGHT and RIGHT POSITION LIGHT .
• FOG LIGHTS (after fitting, ADJUST fog lights)
• ORNAMENTAL GRILLE  / CENTER COVER 
• BUMPER TRIM PANEL FINISHER 
• SPOILER 
• CAR REGISTRATION NUMBER