63 99 002 Replacing halogen bulb for high beam headlight on left
WARNING:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
Unlock retaining tab (1) and remove protective cap (2) from headlight.
Installation note:
Protective cap (2) must be correctly engaged.
Check seal.
Replace protective cap (2) if necessary.
Comply with INSTRUCTIONS FOR REPLACING THE PROTECTIVE CAP .
Release lock (1) and pull halogen bulb for high-beam headlight (2) out of headlight.
Disconnect plug connection (3) and remove halogen bulb for high-beam headlight (2).
Installation note:
Make sure halogen bulb for high-beam headlight (2) is correctly seated.
Note BULB TYPE .