11 36 655 Removing and installing/replacing both solenoid valves (N14)

IMPORTANT: Always check that the solenoid valves are clean during removal and installation.
Possible malfunction if valves are contaminated:

Necessary preliminary tasks:

Disconnect plug connection (3) for intake solenoid valve.

Release screw (1).

Remove solenoid valve (2) for intake side.

Fig 1: Identifying Plug Connection, Solenoid Valve And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace sealing ring on solenoid valve.

Fig 2: Identifying Sealing Rings On Solenoid Valves

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Check function of DME.