LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2011 >> Cooper S, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1245 (Body Equipment - Tightening Torques - E90-E91 (-08); E92/E93) >> Rear Bumper >> 51 12 Rear Bumper

51 12 Rear Bumper

WARNING: This page does not describe the selected car, but rather 22 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATIONS - REAR BUMPER

  Type Thread Tightening specification Measure
1AZ Carrier to body E81 / E82 / E87 / E90 / E91 / E92 / E93 M12   66 Nm
2AZ Bumper to guide, side panel E81 / E82 / E87 / E90 / E91 / E92 / E93     3 Nm
3AZ Guide to side panel E81 / E82 / E87 / E90 / E91 / E92 / E93     3 Nm
4AZ Bumper to guide, top middle E81 / E82 / E87 / E90 / E91 / E92 / E93     3 Nm
5AZ Guide, top middle, to rear trim panel E81 / E82 / E87 / E90 / E91 / E92 / E93     3 Nm