LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2011 >> Cooper S, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Axle Shafts - Cooper (R50), Cooper S (R53) & Convertible (R52)) >> Description & Operation >> Driveshaft Bar Shafts

Driveshaft Bar Shafts

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

The inner and outer joints are connected together by bar shafts of solid construction but different lengths and diameters depending on the gearbox used. All outer joints have shields to protect the wheel speed sensors. MINI Cooper has shields on the inner joints to protect the drive shaft seal. The MINI Cooper S has no need for a shield on the left inner joint due to the proximity of the inner joint to the differential housing.