31 11 040 Removing and installing/replacing stiffening plate (M5)
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS
for raising the vehicle
Driving without stiffening plate is not permissible!
Driving without stiffening plate is not permissible!
Necessary preliminary work:
- Remove front UNDERBODY PROTECTION .
Release screws (1).
Tightening torque 31 10 2AZ .
Remove thrust panel (reinforcement plate) (2).
Installation note:
Replace screws (1).