32 41 105 Removing And Installing/Replacing Belt Pulley For Hydraulic Pump
WARNING: This page does not describe the selected car, but rather 47 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Carry out preliminary work as described in the information "Replacing drive belt
. See 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N63)
, 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N55)
or 11 28 010 REMOVING AND INSTALLING/REPLACING DRIVE BELT FOR ALTERNATOR (N57 D30 U/O/T 1)
".
Slacken screws (1).
Relieve tension on drive belt and remove from belt pulley (2). See 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N63) or 11 28 010 REPLACING DRIVE BELT FOR ALTERNATOR (N55) .
Unscrew bolts (1) and remove belt pulley (2).
Installation note:
Lettering on belt pulley (2) must point forwards.
Replace microencapsulated screws.
Tightening torque: 32 41 4AZ .