34 11 Front Brake
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT BRAKE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Brake disc to wheel hub (contact faces between brake disc and wheel hub clean and grease-free) | R55/R56/R57/R58/R59 | Torx screw M10 x 13 | Replace screws | 27 Nm |
| R60/R61 | Hexagon socket screw M 8x14 | Replace screws | 16 Nm | |
| 2AZ Brake caliper to steering knuckle | R55/R56/R57/R58/R59/R60/R61 | M12 | Replace self-locking or microencapsulated screws | 110 Nm |
| R56 GP II | M12 | Replace screws. The new microencapsulated screws must tightened to the prescribed tightening torque within 5 minutes of being screwed in. |
||
| Jointing torque | 50 Nm | |||
| Angle of rotation | 90 ° | |||
| 3AZ Guide screws (hexagon screw) | R55/R56/R57/R58/R59/R60/R61 | WAF 13 | Replace self-locking or microencapsulated screws | 35 Nm |
| 4AZ Protective plate to steering knuckle | R55/R56/R57/R58/R59 | M6 x 10 | Replace self-locking or microencapsulated screws | 8 Nm |
| R60/R61 | M6 x 12 | Replace self-locking or microencapsulated screws | 12 Nm |