51 11 Front bumper
WARNING: This page is about a different car, the 2016 MINI Cooper Paceman, 2015 MINI Cooper Paceman, 2014 MINI Cooper Paceman, and 2013 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bottom bumper spoiler to front panel | R50/R52/R53 | M6 | 6 Nm | |
| 2AZ Bumper to front panel | R50/R52/R53 | M6 | 6 Nm | |
| 3AZ Support to body | R50/R52/R53/R55/R56/R58/R59 | M8 | Nut | 22 Nm |
| R60/R61 | M10 | Nut | 45 Nm | |
| 4AZ Support to holder, bumper, front | R52/R53/R50 | M8x20 | Screw | 22 Nm |
| R55/R56/R58/R59 | M8 | 18.5 Nm | ||
| R60/R61 | M8x20 | 24 Nm | ||
| 5AZ Adjusting fixture to front panel | R50/R52/R53 | M6x20 | 6 Nm | |
| 6AZ Adjusting fixture to bumper | R50/R52/R53 | M6x20 | 6 Nm | |
| 7AZ Lock bridge to body | R55/R56/R58/R59/R60/R61 | 22 Nm | ||
| 8AZ Support to front panel | R60/R61 | 4 Nm | ||
| 9AZ Strut to front panel | R60/R61 | M6 | 8 Nm |