64 11 Heater and Controls
WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, 2008 MINI Cooper, and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
HEATER AND CONTROLS TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Nut, guide pin, heater | R50 / R52 / R53 | M6 | 7.5 Nm | |
| 2AZ Heater to instrument panel trim, bottom | R50 / R52 / R53 | 3 Nm | ||
| 3AZ Heater to cross-member | R50 / R52 / R53 | 4 Nm | ||
| 4AZ Line / A/C system to expansion valve | R50 / R52 / R53 | M6 x 20 | 7.5 Nm | |
| R56 | 8 Nm | |||
| 5AZ Clamping screws to expansion valve | R50 / R52 / R53 / R56 | 6 Nm |