24 11 Transmission Case, Oil Sump
WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, 2008 MINI Cooper, and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION CASE, OIL SUMP TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Drain plug to oil sump/transmission | R56 | M10 | 27 Nm | |
| R56 | M18 | 23.5 +10 Nm | ||
| 2AZ Filler plug to transmission housing | R56 | M14 | 23.5 +10 Nm | |
| 3AZ Oil sump to transmission | R56 | M6 | 8 Nm | |
| 4AZ Transmission to engine | R56 | M10 | 38 Nm | |
| 5AZ Gearshift mount on transmission | R56 | M8 | 19 Nm | |
| 6AZ Selector lever to shaft | R56 | M8 | 12 Nm | |
| 7AZ | ||||
| 8AZ AISIN shift cable to clamping piece | R56 | M8 | 12 Nm | |
| 9AZ AISIN converter, transportation lock | R56 | M12 screw | 17 Nm | |
| R56 | M10 nut | 7 Nm | ||
| 10AZ AISIN screw connection Oil strainer | R56 | Screw M6 | 11 Nm | |
| 11AZ AISIN screw connection, oil cooler | R56 | M12 screw | 35 Nm | |
| 12AZ AISIN screw connection, gear position switch | R56 | Screw M6 | 5.5 Nm | |
| R56 | M14 nut | 7 Nm | ||
| 17AZ AISIN selector slide and oil temperature sensor | R56 | M8 nut | 10 Nm | |
| 18AZ AISIN selector unit | R56 | Screw M6 | Jointing torque | 8 Nm |
| Torque angle | 90 ° ±5° | |||
| 19AZ AISIN input speed sensor EGS multiple connector | R56 | Screw M6 | 5 Nm | |
| 20AZ AISIN output speed sensor | R56 | Screw M6 | 6 Nm | |
| 21AZ AISIN converter to flywheel | R56 | M10 nut | 57 Nm |