41 11 751 Stripping operations - replace the left side member and luggage compartment floor, all-wheel drive vehicle (removed left side wall and tail panel)
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
Vehicles with four-wheel drive
- Remove rear left wheel arch cover (job number: 51 71 041)
- Detach the brake hose from the left brake pipe (job number: 03 34 006)
- Detach propeller shaft from rear axle final drive (job number: 26 11 000)
- Remove rear axle final drive (job number: 33 10 016)
- Remove the rear axle support (all wheel drive vehicle) (job number: 33 31 000)
- Remove the left rear spring strut shock absorber (job number: 33 52 100)
Remove heat shield (1).
Release wiring harness (2) from luggage compartment floor.