41 11 751 Stripping operations - Replace the left side member and luggage compartment floor (removed left side wall and tail panel)

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.

Remove rear left wheel arch cover (job number: 51 71 041)
Detach the brake hose from the left brake pipe (job number: 03 34 006)
Remove rear axle support (job number: 33 31 000)
Remove the left rear spring strut shock absorber (job number: 33 52 100)

Remove heat shield (1).

Release wiring harness (2) from luggage compartment floor.

Fig 1: Identifying Luggage Compartment Floor Wiring Harness And Heat Shield

Courtesy of BMW OF NORTH AMERICA, INC.