41 35 101 Stripping operations - Replacing rear side panel, left

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.

Remove support for bumper trim (job number: 51 12 050)
Remove holder for bumper on left (job number: 51 12 801)
Remove guide for bumper at rear center (job number: 51 12 825)
Remove luggage compartment wheel arch panel (job number: 51 47151)
Remove rear left side window (job number: 51 36 070)
Remove rear light (job number: 63 21 170)
Remove rear left wheel arch cover (job number: 51 71 041)
Remove left wheel arch trim (job number: 51 13 105)
Remove rear left lock striker (job number: 51 22 001)
Remove left door sill cover strip (job number: 51 47 030)
Remove panel for cover on left side member (job number: 51 71 447)
Remove cover housing (job number: 41 63 003)
Remove rear left door (job number: 41 52 080)
Remove left gas pressure spring for tailgate (job number: 51 24 300)