41 12 557 Stripping operations - Replacing center luggage compartment floor, all-wheel drive vehicle (tail panel removed)

NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.

The following list basically represents the removal sequence.

Vehicles with four-wheel drive

Remove heat shield (1).

Release wiring harness (2) from luggage compartment floor.

Release vent hose (3) from luggage compartment floor.

Fig 1: Identifying Heat Shield, Vent Hose, And Luggage Compartment Floor Wiring Harness

Courtesy of BMW OF NORTH AMERICA, INC.