41 12 535 Stripping operations - Replacing luggage compartment floor and both side members (tail panel removed)
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
- Remove rear wheel arch cover (job number: 51 71 041)
- Detach brake hose from brake pipe (job number: 03 34 006)
- Remove rear axle support (job number: 33 31 000)
- Remove spring strut shock absorber (job number: 33 52 100)
Remove heat shield (1).
Release wiring harness (2) from luggage compartment floor.