61 1 150 Releasing tool kit

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Note: For circular connector / ejector tool - Contains the kits 61 1 130, 61 1 140 and 61 1 180.

Series: E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39, E46, E52, E53, E65, E66, E83, E85, R50, R53, RR1.

Storage location: K 106.

Order number: 61 1 150 .

Releasing tool kit.

Consisting of:

61 1 151 Pressing-out tool.

Note: For Power-Timer contacts / AMP and Bosch.

61 1 152 Pressing-out tool.

Note: For Micro-Timer contacts.

61 1 153 Release tool.

Note: For retaining tabs of relay holder.

61 1 154 Replacement sleeve dia. 1.5 mm for 61 1 139.

Note: Order number was reserved in 8/95 on delivery of case temporarily for case insert.

61 1 155 Replacement sleeve dia. 3.5 mm for 61 1 133.

61 1 156 Replacement sleeve dia. 2.5 mm for 61 1 132.

61 1 157 Replacement sleeve dia. 1.5 mm for 61 1 131.

61 1 158 Case with insert.

61 1 159 Operating instructions.

61 1 131 Pressing-out tool.

Note: For 1.5 mm round contacts.

61 1 132 Pressing-out tool.

Note: For 2.5 mm round contacts.

61 1 133 Pressing-out tool.

Note: For 3.5 mm round contacts.

61 1 134 Pressing-out tool.

Note: For mini flat spring contacts.

61 1 135 Pressing-out tool.

Note: For standard flat spring contacts.

61 1 136 Pressing-out tool.

Note: For Power-Timer contacts (G & H).

61 1 137 Pressing-out tool.

Note: For Timer contacts.

61 1 138 Socket wrench.

Note: For telltale lamps (instrument cluster).

61 1 139 Pressing-out tool.

Note: Slotted sleeve for 1.5 mm dia. Kostal round contacts.

61 1 141 Release tool.

Note: For D 2.5 / ELA, 4-pin, round.

61 1 142 Release tool.

Note: For D 2.5 / ELA, 7-pin, round.

61 1 143 Release tool.

Note: For D 2.5 / ELA, 12-pin, round.

61 1 144 Release tool.

Note: For D 2.5 / ELA, 25-pin, round.

61 1 145 Release tool.

Note: For D 1.5 / ELA, 10-pin, round.

61 1 149 Replacement blades.

Note: For pressing-out tool 61 1 148.

61 1 148 Pressing-out tool for SLC.

Note: SLK = Sensor Laminated Contacts.

61 1 180 Pressing-out tool.

Note: For load current contacts This individual tool belongs to 61 1 150 .

Fig 1: Identifying 61 1 150 Releasing Tool Kit

Courtesy of BMW OF NORTH AMERICA, INC.