11 41 Oil pump with Strainer and Drive
TIGHTENING TORQUE SPECIFICATIONS - OIL PUMP WITH STRAINER AND MOTOR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Oil pump to bedplate | N16, N18 | M8x28 | 25 Nm | |
| 2AZ Sprocket to oil pump | N16, N18 | M8x35 | Replace screw. | |
| Jointing torque | 5 Nm | |||
| Angle of rotation | 90 ° | |||
| 3AZ Oil pump cable clip | N16, N18 | M5x12 | 4 Nm | |
| 4AZ Solenoid valve to oil pump | N16, N18 | M6x20 | 8 Nm | |
| 5AZ Locking panel on counter support | N16, N18 | M5x12 | 4 Nm |