51 11 157 Replace bumper panel, front

Necessary preliminary tasks: 

• Remove FRONT BUMPER PANEL 

If necessary, swap over outside temperature sensor (1) and lead (2).

Fig 1: Identifying Outside Temperature Sensor And Lead

Courtesy of BMW OF NORTH AMERICA, INC.

Swap over the following parts according to version: 

• Locator lights, see LEFT POSITION LIGHT or RIGHT POSITION LIGHT
• Fog lights, see LEFT FOG LIGHT (WITH HEADLIGHT CLEANING SYSTEM) , RIGHT FRONT FOG LIGHT or FOG LIGHT (WITHOUT HEADLIGHT CLEANING SYSTEM) . Also, ADJUST after fitting.
• ORNAMENTAL GRILLE IN BUMPER PANEL  or CENTER COVER 
• BUMPER TRIM PANEL FINISHER 
• SPOILER 
• CAR REGISTRATION NUMBER