61 35 115 Removing and installing/replacing footwell module

Necessary preliminary tasks: 

• Disconnect NEGATIVE BATTERY CABLE 
• Remove FRONT LEFT ENTRANCE COVER STRIP

Unscrew nuts (1).

Tightening torque 61 35 7AZ .

Pull footwell module (2) forwards a little.

Fig 1: Identifying Footwell Module And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1) and remove footwell module (2).

Fig 2: Identifying Footwell Module And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• Carry out VEHICLE PROGRAMMING/ENCODING .