00 00 ... Steering components: checking for zero clearance, leaks, damage and wear

Checking For Zero Clearance: 

• Steering wheel: Move steering wheel back and forth and check for zero clearance.
• Tie rod joint: There must no clearance between tie rod arm (2) and tie rod joint (1).

Fig 1: Identifying Tie Rod Arm & Tie Rod Joint

Courtesy of BMW OF NORTH AMERICA, INC.

Checking For Leaks: 

The following illustrations shows the arrangement of the power steering components and lines.

Fig 2: Identifying Steering Components

Courtesy of BMW OF NORTH AMERICA, INC.

Check all visible connections, hoses, lines and steering gear for traces of fluid.

Checking For Damage And Wear: 

Check steering sleeves, flexible disc and axle and tie rod sleeves for damage (e.g. cracks, holes) for leaks or missing clamping bands on gaiters.