33 55 Stabilizer Bar
WARNING: This page is about a different car, the 2010 MINI Cooper, 2009 MINI Cooper, 2008 MINI Cooper, and 2007 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
STABILIZER BAR TIGHTENING TORQUES
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Stabilizer link to stabilizer |
R56 |
M10 x 1.5 |
Replace nut |
56 Nm |
| 2AZ Stabilizer link to trailing arm |
R56 |
M10 x 1.5 |
Replace nut |
56 Nm |
| 3AZ Retaining bracket, stabilizer bar to rear axle support |
R56 |
M8 |
|
19 Nm |