34 52 550 Removing and installing/replacing DSC angular rate sensor (DSC sensor)

Necessary preliminary tasks: 

• Remove FRONT PASSENGER'S SEAT
• If necessary, remove cover for video module.
• If necessary, partially release floor trim.

Disconnect plug connection (1).

Implement screw connection correctly, otherwise there may be malfunctions in the DSC.

Fig 1: Identifying Plug Connection And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (2) and remove DSC sensor.

Installation note: 

Tightening torque 34 51 5AZ .