LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2011 >> Cooper Base, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2131 (COLLISION - BODY PANEL REPAIR (E60) 535i, 535xi) >> Body Panel Repair General Information >> 41 00... Reinforcement Plate (Bonded) >> Notes

41 00... Reinforcement Plate (Bonded): Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

In the case of a partial replacement piece, a body component is cut at a point described in the repair instructions.

A reinforcement plate is bonded in to ensure sufficient strength.

Observe notes on REPAIR STAGE 2 .

NOTE: The following graphics serve as general illustrations of reinforcement plate repair work. They apply to sectional repairs to the structure.

Mark component in accordance with measurement a and cut.

Fig 1: Identifying Component Cutting Dimension
G06854692Courtesy of BMW OF NORTH AMERICA, INC.