41 00... Installing A Cavity Acoustic Baffle (Expanded)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Carry over schematic representation to the relevant vehicle type.
The following repair represents the procedure for an already expanded cavity bulkhead.
The cavity bulkhead remains on the body in this instance.
Before these work steps, prepare the new part so that it is ready to install (adapting, cutting to size, applying welding primer etc.).
Clean contact surface (1) with spirit.
Apply an approx. 15 mm high bead (2) of window glass adhesive to contact surface (1).
Fit, secure and weld up new part.
WARNING:
Ensure adequate ventilation over entire processing period.