62 10 125 Removing and installing complete instrument panel

Necessary preliminary tasks: 

• Disconnect NEGATIVE BATTERY CABLE
• Remove CENTER CONSOLE TRIM
• Remove KNEE PROTECTION FRONT PASSENGER SIDE to part
• Remove KNEE PROTECTION DRIVER'S SIDE

Release screw (1).

Fig 1: Identifying Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull back complete instrument panel (2) slightly.

Disconnect plug connections and remove instrument cluster (2).

Fig 2: Removing Instrument Cluster

Courtesy of BMW OF NORTH AMERICA, INC.