51 12 070 Replace the center spoiler on rear bumper panel

Necessary preliminary tasks: 

• Remove BUMPER PANEL 

Release latch mechanisms (1) and remove spoiler (2).

Installation note: 

Latch mechanisms (1) on spoiler and bumper panel must not be damaged.

Fig 1: Identifying Spoiler And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Version with PDC: 

Modify all ultrasonic sensors.

Expand latch mechanisms (1) and remove ultrasonic sensor (2) in direction of arrow.

Fig 2: Removing Ultrasonic Sensor

Courtesy of BMW OF NORTH AMERICA, INC.