51 33 000 Removing and installing (replacing) power window unit in left or right front door

Necessary preliminary tasks:

Press down out catches (1) and feed out power window unit (2) from carrier (3).

Fig 1: Identifying Catches, Power Window Unit And Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Release Bowden cable (1) from carrier.

Unfasten screws (2).

Feed out power window unit (5) with retaining plate (3) and bracket (4) in direction of arrow from carrier.

Installation:

Bracket (4) must be correctly seated in carrier.

Fig 2: Removing Power Window Unit With Retaining Plate And Bracket From Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Pull window cavity cover strip (1) off retaining plate (2).

Installation:

Coat window cavity cover strip (1) with water before fitting.

Fig 3: Removing Window Cavity Cover Strip From Retaining Plate

Courtesy of BMW OF NORTH AMERICA, INC.