63 99... Replacing bulb for power socket lighting in front storage compartment

Unlock latch mechanism (1) and pull out bulb holder (2) from bracket (3).

Installation note: 

Make sure bulb holder (2) is seated correctly in bracket (3).

Bulb holder guide (4) must be positioned in associated opening of bracket (3).

Fig 1: Pulling Out Bulb Holder From Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Remove bulb (1) from bulb holder (2) in direction of arrow.

Installation note: 

Note BULB TYPE .

Fig 2: Removing Bulb

Courtesy of BMW OF NORTH AMERICA, INC.