51 16 Mirrors, Finishers, Ashtrays, Consoles
TIGHTENING TORQUE SPECIFICATION - MIRRORS, FINISHERS, ASHTRAYS, CONSOLES
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Bracket, handbrake console, to tunnel | R50/R52/R53 | M6 | 2.5 Nm | |
| 2AZ | Front center console to instrument panel cover trim | R50/R52/R53 | 2.5 Nm | ||
| 3AZ | Mirror to front door | R50/R52/R53/R55/R56/R57/R58/R59/R60/R61 | M6x65 | 8 Nm | |
| 4AZ | Mounting, front center console, to body (nuts) | R50/R52/R53 | 2.6 Nm | ||
| 5AZ | center armrest to bracket | R50/R52/R53 | 4.5 Nm | ||
| R60/R61 | 5 Nm | ||||
| 6AZ | Cover, center console (rear) | R60/R61 | 1.5 Nm | ||
| 7AZ | center console to retaining bracket | R60/R61 | M6 | 4 Nm | |
| 8AZ | Cup holder/end panel | R60/R61 | 1.5 Nm | ||
| 9AZ | Rail to retaining bracket | R60/R61 | 5 Nm | ||
| 10AZ | Retaining bracket for rail to retaining bracket, rear | R60/R61 | 5 Nm | ||