51 11 Front bumper
TIGHTENING TORQUE SPECIFICATION - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Bottom bumper spoiler to front panel | R50/R52/R53 | M6 | 6 Nm | |
| 2AZ | Bumper to front panel | R50/R52/R53 | M6 | 6 Nm | |
| 3AZ | Support to body | R50/R52/R53/R55/R56/R58/R59 | M8 | Nut | 22 Nm |
| R60/R61 | M10 | Nut | 45 Nm | ||
| 4AZ | Support to holder, bumper, front | R52/R53/R50 | M8x20 | Screw | 22 Nm |
| R55/R56/R58/R59 | M8 | 18.5 Nm | |||
| R60/R61 | M8x20 | 24 Nm | |||
| 5AZ | Adjusting fixture to front panel | R50/R52/R53 | M6x20 | 6 Nm | |
| 6AZ | Adjusting fixture to bumper | R50/R52/R53 | M6x20 | 6 Nm | |
| 7AZ | Lock bridge to body | R55/R56/R58/R59/R60/R61 | 22 Nm | ||
| 8AZ | Support to front panel | R60/R61 | 4 Nm | ||
| 9AZ | Strut to front panel | R60/R61 | M6 | 8 Nm | |